. OPERATION EXPLANATION OF COMPONENTS WORK EQUIPMENT LOCK LEVER WARNING equipment control the control hydraulic so the blade does not position and the safety blade control lever is REMARK PARKING BRAKE LEVER WARNING parking brake lever when the the right), the parking brake is applied. REMARK position when the 3 - 38 When leavi ng the operator's compartment, s et the work equipment lock lever se curely to th e LOCK position. If the work equipment injury.
lock lever is not at the LOCK positio n and the control levers are touched b y mistake, it may lead to serious per sonal If the work equipment lock lever is not set sec urely to the LOCK position, the work equipment may move and cause se rious injury. Che ck that it is in the position shown in the diagram. When parki ng the machine or when carrying o ut maintenance, always lower t he wo rk equipme nt to the ground, then s et the work equip ment lock lever to the LOCK positi on. This lever (1 lever. ) is the lock device for the w When it is o perated to the LOCK position (I diagram on t he right), operation of the work Even whe n the lever is operated to the LO control le pressure f move.
If the blade lever is set ver will still move. Or other, or the blade control is locked, control lever is at the FLOAT p to the LOCK position, the b automaticall y returned to the HOLD position When startin g the engine, to ensure safety, always set the work equipment l ock lever to the LOCK When parki ng the machine, always set the par king brake lever in the LOC K position . If the parki ng brake lever is operated, the brak e is applied, even when the machine is traveling. The machi machine is ne will suddenly stop, so this is d moving, except in emergencies. angerous.
For this reason, do not operate the p do This lever (2 ) is the lever for applying the pa operated to t he LOCK position (the position If the parkin engine is sta rted, the limit switch is actuated start.