. OPERATION EXPLANATION OF COMPONENTS the machine travels the machine travels in position and it is turn in the direction to a position where it the ON position, the "DISPLAY PANEL A 3 - 39 STEERING, FORWARD-REVERSE, GEAR SH This control lever (3) serves to change forw of machine t ravel, steer the machine to the traveling sp eed and make a counter-rotatio Forward-r everse shifting : FORWARD : REVERSE : Neutral ever is operated to the front en it is operated to the rear, t Position (A) Position (B) Position (N) When the l forward; wh reverse. Steering Left turn : Right turn is at the FORWARD or REVE Position (L):
Position (R) If the lever operated to the left or right, the machine w r is operated. is operated to the left or right that the leve If the lever becomes he avy, the turning radius will bec REMARK When yo u are steering, if you release th e lever, it will return to th e center position and the machine will travel in a straigh t line. When yo u are steering, support your han d with the lever guide to make it easier to carry out the turning operation. Counterro tation turn When steer ing the machine, if the lever is o perated further from the position where it become s heavy, the left and right tracks will rotate in opposite directions and the machine will carry out a counterrotation turn.
Gear shif ting Press the s hift switch of the knob of the ste gear shift le ver to carry out the gearshifting Press the U P switch (U) once to shift up. Press the D OWN switch (D) once to switch When the starting switch is turned to n is automatically set to 1st. transmissio For details o f the method of switching the sh monitor, an d setting the travel speed, see (SPEED RA NGE, SHIFT MODE INDICAT If the operat ing load increases, the travel sp eed will slowly decrease and the transmission will shift down. When the load becom es lighter again, the transmissi on will shift up to the set travel speed. When the tr ansmission automatically shifts down, the speed range display does not change.