Komatsu — HANDLING 4-SYSTEM

MACHINE OPERATIONS AND CONTROLS OPERATION Offset mode: This determines the left offset position for opera- tions such as ditch digging. It is possible to set either the depth display or depth display 0 set mode together with the other three modes, so use these settings to match the operation. DEPTH DISPLAY (DEPTH FROM GROUND SURFACE) When the engine is started and the switch is ON, the depth dis- play will always indicate the depth from the ground surface unless the depth display 0 set mode is being used. It is work equipment is above ground level, UP is displayed.

REMARK This display assumes that the bucket is pointing down, so if the bucket is in the condition shown in the diagram on the right, the actual depth may be different from the display depth. When measuring the depth, always set the machine horizontal. 3-98