Komatsu — HANDLING 4-SYSTEM

OPERATION MACHINE OPERATIONS AND CONTROLS Setting depth display 0 set mode (depth from standard surface) This displays the desired standard surface as 0.0 m (0.0 in), and displays the depth of the bucket from this surface. 1. Turn mode selector switch (1) to the depth display 0 set mode position. 2. Set the machine horizontal, and align the bucket with the position to use as the standard surface. When aligning, the way in which the bucket is placed becomes the standard for the depth display. 3. Turn setting switch (2) to the SET position. The depth dis- play will become 0.0 m. 4. Move the bucket to the point that is to be measured (measurement surface). 3-99