Komatsu — HANDLING ROAD LINER

OPERATION MACHINE OPERATIONS AND CONTROLS USING ROAD LINERS PROHIBITED WORKS Do not carry out the following types of work. Carrying out operations and steering on crushed rock, extremely rough hard rock, steel beams, scrap iron, or near the edges of steel plates will cause damage to the rubber shoes and road liners. In places such as river beds where there are large numbers of large and small boulders, the stones may get caught and damage the rubber shoes and road liners or make the shoes come off. If dozing operations are carried out when the shoes are slipping, this will reduce the life of the rubber shoes and road liner.

Be careful not to get oil, fuel, or chemical solvent on the rubber shoes and road liners. If such a substance shold get on the shoes, remove it immediately. Furthermore, do not travel on road surfaces where oil has col- lected. When putting the machine into long-term storage (3 months or more), store the machine indoors where it is protected from direct sunlight or rain. Do not use the machine in high-temperature areas, such as areas where there is burning wood, steel plates that have been left under the hot sun, or places where asphalt has been laid. When the rubber parts of the road liner are so worn or broken that the head of the mounting bolts are scratched, replace the shoe immediately.

If the bolt heads are broken, the bolt cannot be removed. When installing road liners, always install them to all links on both sides. If they are installed to only one part of the links, their durability will be greatly reduced. LONG LIFE OPERATIONS Be careful of the following points when carrying out work. Avoid carrying out counter-rotation turns on concrete surfaces. Avoid making sudden changes in direction. This may cause premature wear or damage to the rubber shoes and road liners. If the machine has been raised using the bucket, lower it slowly.

Avoid doing work with materials that produce oil when crushed (soya beans, corn, or remains of vegetables squeezed for oil); or wash the machine after use. Avoid handling materials that will attack the adhesion of the steel core, such as salt, ammonium sulphate, potassium chloride, potassium sulphate, or calcium superphosphate; or wash the machine after use. The adhesion of the core will be attacked by salt, so avoid using the machine in coastal areas. When handling salt, sugar, wheat, or soya beans, if there is any deep cut in the rubber shoes and road liners, these substances may get into the lugs or cut portion of the rubber. Always repair the rubber before use.

Do not carry out work that involves scraping against walls or concrete embankments. Rubber shoes and road liners slip extremely easily on snow or frozen roads. Be careful not to slip when travel- ing or working on slopes. The properties of rubber shoes and road liners change when working in extermely cold places, and this will reduce the life of the rubber shoes and road liners. Because of the properties of rubber, use the road liners within a range of -25єC to +65єC (-13єF to +149єF). When carrying out bucket operations, be careful not to damage the rubber shoes and road liners with the bucket. 3-105