Komatsu — HANDLING ROAD LINER

MACHINE OPERATIONS AND CONTROLS OPERATION HANDLING ROAD LINER (Machine equipped with road liner) ROAD LINERS INFORMATION Road liner have excellent properties that are not found in steel shoes. However, if they are used in the same way as steel shoes, full use cannot be made of their advantages. Be sure to operate without straining the rubber shoes in a way that matches the condition of the jobsite and the nature of the work. Comparison Of Road Liners And Steel Shoes Considering the properities of the material used, rubber shoes and road liners offer various advantages. However, their weak point is lack of strength.

Therefore, it is important to understand the advantages of rubber shoes and road liners, and to follow the precautions regarding handling and prohibited work. This will extend the life of the rubbershoes and road liners and will enable the machine to display the advantages of rubber shoes and road lin- ers to the maximum. Before using rubber shoes and road liner, always read "USING ROAD LINERS (PAGE 3- 105)". WARRANTY FOR ROAD LINERS It is important to inspect and maintain the tracks at the correct tension.

Furthermore, these shoes must not be used near objects where they are likely to suffer damage, such as the corners of steel plates, U-shaped ditch liners, blocks, on crushed rock or the sharp edges of rocks, iron beams, or scrap iron. Any damage resulting from the customer’s mistaken use of the machine shall not be included in the scope of the warranty. 3-104 Road liner Steel shoe Little vibration Excellent Average Smooth travel (No creaks) Good Good Little noise Excellent Average No damage to paved surface Excellent Average Easy to handle Average Average Easily damage Good Excellent Strong drawber pull Excellent Excellent