OPERATION MACHINE OPERATIONS AND CONTROLS Setting offset mode When the boom is offset to the left to the desired set position, it will automatically stop. 1. Turn mode selector switch (1) to the offset mode position. 2. Offset the boom to the position to be set. 3. Turn setting switch (2) to the SET position. The buzzer will sound twice and indicator (3) will light up. 4. If the boom is offset to the right, then to the left again, it will stop at the set point. 5. When canceling the offset mode, turn mode selector switch (1) to the offset mode position, then turn setting switch (2) to the CLEAR position. Indicator (3) will go out.
REMARK When the mode is set, if the starting switch is turned OFF, the mode setting is canceled. 3-103