MACHINE OPERATIONS AND CONTROLS OPERATION 1. Turn mode selector switch (1) to the height mode posi- tion. 2. Raise the boom to the position to be set. 3. Turn setting switch (2) to the SET position. The buzzer will sound twice and indicator (3) will light up. 4. If the boom is lowered, then raised again, it will stop at the set point. NOTICE The height mode sets the amount that the boom can be raised. If the boom height is set with the arm and bucket pulled in as shown in the diagram on the right, the bucket may become higher when the arm and bucket are moved out, so be careful not to contact anything around the machine. 5.
When canceling the height mode, turn mode selector switch (1) to the height mode position, then turn setting switch (2) to the CLEAR position. Indicator (3) will go out. REMARK When the mode is set, if the starting switch is turned OFF, the mode setting is canceled. 3-102