Komatsu — HANDLING 4-SYSTEM

OPERATION MACHINE OPERATIONS AND CONTROLS NOTICE As in the diagram on the right, if the arm is pulled in and the depth is set, the arm may become lower when it is pushed out, so be careful when setting. NOTICE As in the diagram on the right, if the arm is moved out and the depth is set, the bucket may become lower when it is pulled in, so be careful not to damage any buried object. 5. When canceling the depth mode, turn mode selector switch (1) to the depth mode position, then turn setting switch (2) to the CLEAR position. Indicator (3) will go out. REMARK When the mode is set, if the starting switch is turned OFF, the mode setting is canceled.

Setting height mode When the boom is raised to the desired set height, it will auto- matically stop. 3-101