Komatsu — INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250

MAINTENANCE MAINTENANCE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING If inspection, cleaning, or maintenance is carried out with the engine running, dirt will get into the engine and the engine will suffer damage. Always stop the engine before carrying out these opera- tions. When using compressed air, there is danger that dirt may be blown around and cause serious injury. Always use safety glasses, dust mask, and other protective equipment. Checking Whenever the red piston in dust indicator (1) appears, clean the air cleaner element. NOTICE Do not clean the air cleaner element before the red piston in dust indicator (1) appears.

If the air cleaner element is cleaned frequently before the red piston in the dust indicator appears, the air cleaner cannot provide the proper performance and the cleaning efficiency is lowered. Cleaning the outer element 1. Open the battery room door on the left side of the machine, remove clips (2) at 3 places, then take out dust cup (3). NOTICE Never remove inner element (5). Dust will get in and cause failure of the engine. 2. Remove outer element (4). 4-19