MAINTENANCE MAINTENANCE PROCEDURE Replacing inner element 1. Open the battery room door on the left side of the machine, remove clips (2) at 3 places, then take out the dust cup. 2. Remove outer element (4). Do not remove inner element (5) at this point. NOTICE When cleaning the dust cup, do not remove evacuator valve (6). 3. Clean the inside of the air cleaner body and the dust cap. 4. Remove inner element (5) and quickly install a new inner element. 5. Set the cleaned outer element in position, then secure dust cup (3) with mounting clips (2). CAUTION When installing the dust cup, check O-ring (7) and replace it if there are any scratches or damage. 6.
Press the button to return the red piston in the dust indicator to its original position. 4-21