MAINTENANCE MAINTENANCE PROCEDURE CHECK AND TIGHTEN TRACK SHOE BOLTS If the machine is used with track shoe bolts (1) loose, they will break, so tighten any loose bolts immediately. Method for tightening 1. First tighten to a tightening torque of 196 ± 19.6 N•m (20 ± 2 kgf•m, 144.7 ± 14.5 lbft) then check that the nut and shoe are in close contact with the link contact surface. 2. After checking, tighten the angle of the shoe bolts a further 90є ± 10є for steel shoes (120є ± 10є for swamp shoes) and 60є ± 10є for road liners. Order for tightening Tighten the bolts in the order shown in the diagram on the right.
After tightening, check that the nut and shoe are in close con- tact with the link mating surface. 4-25