Komatsu — Lubrication (every 500 service hours)

5.8. Service procedure Maintenance Lubrication (every 500 service hours) Apply the parking brake, and lock the front and rear frame with the safety bar and pin. Lower the work equipment to the ground, then stop the engine and securely lock the work equipment control levers. Using a grease gun, pump in grease through the grease fittings marked by the arrows. After greasing, wipe off any old grease that is pressed out. Centre cardan shaft (1 points) Lubricate the spring washer of the ventilator belt pulley. Open the maintenance flap on left at rear. Lubricate the grease nipple on the spring washer of the belt pulley using a grease gun. 5-60 WARNING WARNING