5.8. Service procedure Maintenance 8. Pour in the specified amount of engine oil through the oil filler port (F) . For details about the recommended oil, see section "5.4. Lubricants and operating means" on page 5-13. 9. After re-fitting oil, check that the oil is at the specified level. For details, see section "5.8.2. Maintenance upon demand" on page 5-22. F 10. Check for oil leakage from the transmission case and filter. Cleaning the transmission case breather Remove all mud and dirt from around the breather, then remove the breather. Pour in cleaning fluid and clean the breather. Take care that no dust and dirt enters the transmission case through the port while the breather is removed.
Cleaning the fuel screen of the fuel tank Open the maintenance flap on right at rear. There is a housing with a screen located on the fuel tank underneath the fuel filter. Remove the sealing screw (arrow) from the housing, remove the screen and clean. 5-62