Komatsu — 2. Transmission CUT-OFF switch

3.2. Description of the individual elements Operation 1. Start switch This switch is used to start or stop the engine. OFF In this position, the key can be inserted and pulled off, the electric circuit is turned off and the engine is switched off. OFF ON ON In this position, electric current flows in the charging, lamp and auxiliary circuits. Keep the start switch key set to ON while the engine is running. START A0061160 START This is the engine start position. Keep the key at this position dur- ing cranking. Release the key immediately after starting the engine; it will automatically return to the ON position.

NOTE The engine can only be started when the directional lever is set to the ’N’ position. 2. Transmission CUT-OFF switch If the machine has to be started on a slope, always turn the transmission cut-off switch to OFF and depress the left brake pedal. Then depress the accelerator pedal while releasing the left brake pedal to start-up the machine slowly. CUT-OFF Pressing the push button switches the cut-off ON and OFF, alter- nately. After pressing the switch, the control lamp will light up; if it is pressed again, the pilot lamp will go out and the transmission cut- off is turned OFF. Normally, this switch is set to ON. A0061170 OFF Acts as normal brake (like right brake pedal).

ON Acts as normal brake, but also switches transmission to NEUTRAL. 3-18 WARNING WARNING