Operation 3.2. Description of the individual elements 3. Front working lights switch Before turning on the front working lights, set the lamp switch for the side clearance light or for the head light to ON. Otherwise, the working lights will not light up. WORKING LAMP After pressing the switch, the control lamp will light up; if it is pressed again, the control lamp will go out and the working lamp is turned OFF. F A0061180 4. Rear working lights switch Before turning on the rear working light, set the lamp switch for the side clearance light or for the head lights to ON. Otherwise the working lights will not light up.
WORKING LAMP After pressing the switch, the control lamp will light up; if it is re- pressed, the control lamp will go out and the working lamp is turned OFF. R A0061181 5. Lights switch This is used to light up the head lamps, side clearance lamps, tail lamps, and instrument panel lighting. 1 2 3 1 OFF off 2 position side clearance lamp, tail lamps and instrument panel lighting are turned on, 3 position head lamps light up in addition to lamps at position. AE061190 NOTE The lamp switch can be operated regardless of the lever position. 3-19