3.2. Description of the individual elements Operation 9. Brake pedals When travelling downhill, use the engine as a brake, and always use the right brake pedal. Do not use the brake pedals repeatedly unless necessary. Do not put your foot on this pedal unless necessary. Right brake pedal The right brake pedal operates the wheel brakes and is used for normal braking. Left brake pedal The left brake pedal operates the wheel brakes, and if the trans- mission cut-off switch is set to ON, it also returns the transmission to neutral.
NOTE When the accelerator is being used for operating the work equipment, always use the left brake pedal to slow down or stop the machine after setting the transmission cut-off switch to ON. GK100670 GK100670 If the selection switch for the transmission cut-off switch to OFF, the left brake pedal holds the same function as the right brake pedal. 10. Accelerator pedal This pedal controls the engine speed and output. The engine speed can be freely controlled between low idling and full speed. GK100670 GK100670 3-32 WARNING WARNING