Komatsu — To lock the cap

Operation 3.2. Description of the individual elements 3.2.4. Steering column tilt lever Stop the machine before adjusting the angle of the steering wheel. This lever allows the steering column to be tilted forward or back- ward. Pull the lever up and move the steering wheel to the desired posi- tion. Then push the lever down to lock the steering wheel in posi- tion. Range of adjustment: 125 mm (4.92 in) (stepless) 3.2.5. Cap with lock The fuel tank, hydraulic fluid tank, filler neck for the transmission fluid and the coolant expansion tank are all provided with lockable caps. Use the starter key to open and close the relevant cap, as shown. To open the cap 1.

Insert the key into the cap as far as it will go. If the key is turned before it is inserted all the way, it may break. 1 45° 2. Turn the key counterclockwise and bring the rotor groove in line with the aligning mark (A) on the cap. Turn the cap slowly until a "clicking" sound is audible. This releases the lock and allows the cap to be opened. 2 A 180° GK100251 To lock the cap 1. Turn the cap into place. 2. Turn the key clockwise and take the key out. A GK100252 3-33 WARNING WARNING 1 2 GK100250 1 2 GK100250