Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK ALTERNATOR BELT TENSION, ADJUST CHECKING ADJUSTING in position. NOTICE 4 - 47 The pulley when press ed with a thumb ( approx . 59N (6 kg)) should be approx. 13 mm (0. 1. Loosen bolts a nd nuts (1), (2), ( 3), and 2. Turn nut (5) c lockwise and mo ve alt the deflection of th e belt is approx. 1 3 mm (0.5 in)( approx. 59N (6 kg)). 3. Tighten bolts Check each pulley for damage, wear o f the V- groove, an d wear o f the V-belt. In particular, be sure to check that the V-b elt is no touching the bott om of the V-groove. In case any of the following occurs, a sk the Komatsu d istributo r in your territory to replac e the belts with new ones.

• The fan belt ha s elongated, leaving little al lowance f or adjustmen • A cut or crack i s found on the belt. • Slipping or cre aking sound is heard comin g from th When the new V-b elt is set, readjust it after o ne hour o