Komatsu — METHOD OF OPERATING AUTO-GREASING SYSTEM

. ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM 2. Remove grease cartridge (3) by turning it to the left. Do not Part No. Capacity 421-S95-3340 1000cc 6 - 36 Replace grease c artridge according to procedur e described below. 1. Remove cov degrees to th detach seal c ap (4) at this time. 3. Detach cap (5 ) and middle plug (6) from new grease car tridge and tightly scr Screw in tight ly to ensure that n 4. When fixing, if grease cartridge i s pressed sli ghtl y and g rease comes out an cartridge is sc d deposits in a h eaped s hap e, a nd if g rease rewed into suctio n port connector under above conditions,no air will enter. (Ma x. No. of turn s is approx 5.

Turn the cove r to right and tighte n it until securely fixed. If not tightened well , there is a possibil ity that it will work loose due to machine vibra Use the grease c artridge shown bel Part name Q'ty Cartridge 1