EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 8.5 INSTALLATION OF AIR INTAKE MANIFOLD Install as follows: 1. Install six gaskets to the air intake manifold. 2. Install thirteen flanged screws and isolator gaskets to the air intake manifold. Secure air intake manifold to cylinder head. Torque the bolts to 25 N·m (18 lb·ft). 3. Re-install electrical harness connectors to appropriate sensors. 4. Install oil coolant module. Refer to section 26.3. 5. Install fuel module. Refer to section . 6. Install cold boost pipe. Refer to section 7.4. 7. Install exhaust gas recirculation (EGR) mixer pipe and delivery pipe. Refer to section . 8. Install the poly-V-belts. Refer to section 40.3. 9.
Prime fuel system. Refer to section . 10. Fill the cooling system. Refer to OEM specifications. All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 8-9