14.13 INSPECTION OF VALVE 14.13 INSPECTION OF VALVE The valve stems must be free from scratches or scuff marks, and the valve faces must be free from ridges or cracks. Some pitting of the valve face is normal, and is acceptable as long as no leak paths are evident. If leak paths exist, re-face the valves or install new valves. If the valve heads are warped or the valve stem is bent, replace the valves. See Figures 14-10 and 14-11. Figure 14-10 Exhaust Valve Figure 14-11 Intake Valve All information subject to change without notice. 14-28 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION