Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

14.14 INSTALLATION OF VALVE, SPRING, SEAL AND VALVE CAP 11. If the cylinder head is removed from engine, install cylinder head. [a] For the DD13 ONLY: refer to section 14.3. [b] For the DD15 ONLY: refer to section 14.7. 12. Prime fuel system. Refer to section . 13. Close any drain cocks that were opened and fill the cooling system. Purge the air from the system using the vent in the thermostat housing. Complete filling of the cooling system is essential for proper engine operation. ENGINE EXHAUST To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic. 14. Start the engine and check for leaks.

All information subject to change without notice. 14-30 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION