Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

15.5 ASSEMBLY OF PISTON AND CONNECTING ROD ASSEMBLY 3. Position the long end of the connecting rod (2) on the same side as the valve relief (1) in the top of the piston. 4. Install piston pin into the pin bore, through the rod, until it rests against the previously installed retaining ring. 5. Using the appropriate flat-nosed pliers, install the other retaining ring into the retaining ring recess in the piston boss to lock the pin in place. Orient the retaining ring gap to either the 12 o'clock or 6 o'clock position. All information subject to change without notice. 15-10 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION