Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

16.5 INSTALLATION OF THE CYLINDER LINER 16.5 INSTALLATION OF THE CYLINDER LINER Install as follows: 1. Wipe the inside and outside of the liner clean. NOTE: Thoroughly clean the cylinder block, liner, and counter bores to remove any foreign material. Foreign material in the cylinder liner counter bores can cause the liner to seat improperly. Clean with a wire brush. 2. Install the two new seal rings (1, 3) onto the cylinder liner (2). NOTE: Ensure when installed, the seal rings are properly seated in the proper grooves (locations 1 and 3). 3. Lubricate the seal rings with clean engine oil. 4. Install the cylinder liner in cylinder block bore using cylinder liner installation tool J-45876.

All information subject to change without notice. 16-8 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION