Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 16.4 CLEANING OF THE CYLINDER LINER Clean as follows: NOTE: If using de-greasing solution to clean cylinder liner when finished, an application of clean engine oil will need to be applied to protect the cylinder liner from corrosion. 1. If cleaning a new or used liner, use a clean cloth and clean engine oil. To avoid injury from flying debris when using compressed air, wear adequate eye protection (face shield or safety goggles) and do not exceed 40 psi (276 kPa) air pressure. 2. Dry the liner with compressed air. NOTICE:

If the liners are not to be installed at this time, oil them lightly with clean engine lubricating oil and store them upright in a clean, dry area. Do not let the liners rest on their sides and do not store anything on top of the liners. 3. Coat the bore of the liner with clean engine lubricating oil. 4. Allow the liner to sit for 10 minutes (to allow the oil to work into the surface finish). 5. Wipe the inside of the liner with white paper towels. 6. If a dark residue appears on the towels, repeat the oiling and wiping procedure until residue no longer appears. All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 16-7