Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

16.3 INSPECTION OF CYLINDER LINER 4. Inspect the block bore and cylinder liner. [a] Measure the block bore and the outside diameter of the liner. Table 16-1 Acceptable Cylinder Liner Diameters [b] If the liner does not meet specification, replace with a new part. 5. Inspect the cylinder liner. [a] Check the two seal ring grooves for burrs or sharp edges. [b] If any are detected, smooth with a Scotch-Brite® pad. All information subject to change without notice.

16-6 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION Location DD13 DD15 DD16 A 158.98 to 159 mm (6.2590 to 6.2598 in.) 166.98 to 167 mm (6.5740 to 6.5748 in.) 166.98 to 167 mm (6.5740 to 6.5748 in.) B 141.97 to 141.95 mm (5.589 to 5.588 in.) 148.95 to 148.97 mm (5.864 to 5.865 in.) 148.95 to 148.97 mm (5.864 to 5.865 in.)