Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

17.2 REMOVAL OF CRANKSHAFT 15. Loosen and remove the main bearing cap bolts. Using Main Bearing Cap Puller tool (J–48884), remove the main bearing caps for inspection. NOTE: Paint-mark the main bearing caps so that they can be installed to their respective, original positions. The main bearing caps must be kept in sequence, so that they are installed to their original positions. 16. Remove the thrust washers from each side of the No. 6 main bearing cap. 17. Remove the crankshaft. All information subject to change without notice. 17-8 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION