EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 34.1 DESCRIPTION AND OPERATION OF FLYWHEEL, FLYWHEEL HOUSING AND RELATED PARTS This section explains the description(s) and operation(s) of the following components: Flywheel Ring Gear Flywheel Housing 34.1.1 Flywheel The flywheel is attached to the rear end of the crankshaft with twelve bolts. The bolt holes in the crankshaft and flywheel are equally spaced. 34.1.2 Ring Gear The steel ring gear and flywheel is a two-piece assembly. Prior to assembly, the ring gear is heated to expand its diameter. It is then installed onto the flywheel and allowed to cool. After the ring gear cools, it contracts onto the flywheel, locking it in place. 1.
Steel Ring Gear 2. Flywheel All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 34-3