EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 36.1 REMOVAL OF THE VIBRATION DAMPER Remove as follows: 1. Remove the poly-V-belt. Refer to section 40.1. 2. Remove the eight bolts (1) attaching the vibration damper (2) to the crankshaft (4). 3. Using guide studs tool J-43431, remove the vibration damper. 4. Remove the splash ring (3). All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 36-3