Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

36.2 INSTALLATION OF THE VIBRATION DAMPER 36.2 INSTALLATION OF THE VIBRATION DAMPER Install as follows: 1. Install the splash ring (1) with cup-side (2) toward end of crankshaft. 2. Using guide studs tool (J-43431), install the vibration damper onto the crankshaft. 3. Install the eight bolts attaching the vibration damper to the crankshaft. Torque to 200 N·m (147.5 lb·ft). Refer to section 36.2. 4. Install the poly-V-belt. Refer to section 40.3. All information subject to change without notice. 36-4 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION