106 GETTING TO KNOW YOUR INSTRUMENT PANEL For Screen Setup: oil change indicator system (after performing the scheduled maintenance), refer to the following procedure: D ISPLAY M ENU I TEMS OK button allows user to enter menu and submenus. Push and release the up or down arrow button until the desired selectable menu icon is highlighted in the instrument cluster display. Speedometer Within each submenu layer, the up and down arrow buttons will allow the user to select the item of interest. 1. Without pressing the brake pedal, push the ENGINE START/STOP button and place the ignition in the ON/RUN position (do not start the engine).
Pushing the OK button makes the selection and a confirmation screen will appear (returning the user to the first page of the submenu). 2. Push and release the down arrow button to scroll downward through the main menu to “Vehicle Info.” Push and release the up or down arrow button until the speedometer menu item is highlighted in the instrument cluster display. Push and release the OK button to cycle the display between mph and km/h. Vehicle Info Pushing the left arrow button will exit each submenu layer and return to the main menu. O IL L IFE R ESET 3. Push and release the right arrow button to access the ”Oil Life” screen.
Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will display in the instrument cluster display for five seconds after a single chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style. 4. Push and hold the OK button to reset oil life. If conditions are met, the gauge and numeric display will update to show 100%.
If conditions are not met a pop up message of “To reset oil life engine must be off with ignition in run” will be displayed (for five seconds), and the user will remain at the Oil Life screen. Push and release the up or down arrow button until the Vehicle Info menu icon is displayed in the instrument cluster display. Push and release the left or right arrow button to scroll through the information submenus and push and release the OK button to select or reset the resettable submenus. 5. Push and release the up or down arrow button to exit the submenu screen.
Tire Pressure Monitor System Air Suspension — If Equipped Unless reset, this message will continue to display each time you place the ignition in the ON/RUN position. To turn off the message temporarily, push and release the OK or arrow buttons. To reset the NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Coolant Temperature — If Equipped Trans Temperature (Automatic only) Oil Temperature Oil Pressure — If Equipped