RAM 1500 — Driver Assist — If Equipped

GETTING TO KNOW YOUR INSTRUMENT PANEL 107 Oil Life connection graphic with text message (connected or disconnected). Adaptive Cruise Control Off Battery Voltage — If Equipped Gauge Summary — If Equipped Pitch And Roll When ACC is deactivated, the display will read “Adaptive Cruise Control Off.” Coolant Temp Displays the pitch and roll of the vehicle in the graphic with the angle number on the screen. Adaptive Cruise Control Ready Trans Temp Oil Temp NOTE: When vehicle speed becomes too high to display the pitch and roll, “- -” will display in place of the numbers, and the graphic will be greyed out.

A message indicating the necessary speed for the feature to become available will also display. Driver Assist — If Equipped When ACC is activated but the vehicle speed setting has not been selected, the display will read “Adaptive Cruise Control Ready.” Oil Pressure Push the SET + or the SET- button (located on the steering wheel) and the following will display in the instrument cluster display: 3 Engine Hours Off Road Push and release the up or down arrow button until the Off Road menu icon is displayed in the instrument cluster display. Push and release the left or right arrow button to scroll through the information submenus.

ACC SET When ACC is set, the set speed will display in the instrument cluster Ъ ­page­162. The Driver Assist menu displays the status of the ACC and LaneSense systems. The ACC screen may display once again if any ACC activity occurs, which may include any of the following: Push and release the up or down arrow button until the Driver Assist menu is displayed in the instrument cluster display. Drivetrain Front Wheel Angle: displays the graphical and numerical value of calculated average front wheel angle from the steering wheel orientation. Distance Setting Change Adaptive Cruise Control (ACC) Feature System Cancel Driver Override Transfer Case Lock Status:

displays “Lock” graphic only during 4WD High, 4WD High Part Time, 4WD Low status. The instrument cluster display displays the current Adaptive Cruise Control (ACC) system settings. The information displayed depends on ACC system status. System Off ACC Proximity Warning ACC Unavailable Warning Axle Lock And Sway Bar Status (If Equipped): displays front and rear or rear only axle locker graphic, and sway bar Push the Adaptive Cruise Control (ACC) on/off button (located on the steering wheel) until one of the following displays in the instrument cluster display: