108 GETTING TO KNOW YOUR INSTRUMENT PANEL LaneSense — If Equipped Stop/Start — If Equipped red, and the affected low tire will have a red glow. “Trailer Tire Low“ will be displayed on the center bottom of the Instrument Cluster Display screen. Audio The instrument cluster display displays the current LaneSense system settings. The information displayed depends on LaneSense system status and the conditions that need to be met Ъ page127. Fuel Economy Push and release the up or down arrow button until the Stop/Start icon/title is highlighted in the instrument cluster display. The screen will display the Stop/Start status.
Trailer Tow — If Equipped Push and release the up or down arrow button until the Audio Menu icon/title is highlighted in the instrument cluster display. This menu will display the audio source information, including the Song name, Artist name, and audio source with an accompanying graphic. Push and release the up or down arrow button until the Fuel Economy menu item is highlighted in the instrument cluster display. Push and hold the OK button to reset Average Fuel Economy. Push and release the up or down arrow button until the Trailer Tow menu item is highlighted in the instrument cluster display.
Push and release the right or left arrow button to cycle through the following trailer tow information: Trip (trailer specific) Distance: Push and hold the OK button to reset the distance. Phone Call Status Current Fuel Economy Average Fuel Economy When a call is incoming, a Phone Call Status pop-up will display on the screen. The pop-up will remain until the phone is answered or ignored. Range To Empty Trip Info Integrated Trailer Brake Module (ITBM): Braking Output NOTE: The call status will temporarily replace the previous media source information displayed on the screen. When the pop-up is no longer displayed, the display will return to the last used screen.
Push and release the up or down arrow button until the Trip menu item is highlighted in the instrument cluster display. Push and release the right or left arrow button to enter the submenus of Trip A and Trip B. The Trip A or Trip B information will display the following: Trailer Type ITBM Gain Trailer Light Check: Push and hold the OK button to begin the Trailer Light Test sequence Ъ page205. Distance Trailer Tire Pressure Monitoring: The Instrument Cluster Display will display the Trailer Tire Pres sure for a connected trailer with sensors that match the active trailer profile.
When a low tire is present, the low tire value will be displayed in Average Fuel Economy Elapsed Time Push and hold OK button to reset all information.