RAM 1500 — To Activate/Deactivate

164 STARTING AND OPERATING Adaptive Cruise Control (ACC) Menu ACC Proximity Warning When the driver’s door is open at low speeds The instrument cluster display will show the current ACC system settings. The information it displays depends on ACC system status. ACC Unavailable Warning The instrument cluster display will return to the last display selected after five seconds of no ACC display activity. Activating Adaptive Cruise Control (ACC) When the driver’s seat belt is unbuckled at low speeds Push the Adaptive Cruise Control (ACC) on/off button until one of the following appears in the instrument cluster display:

When there is a stationary vehicle in front of your vehicle in close proximity When Electronic Stability Control (ESC) Full Off mode is active To Activate/Deactivate Adaptive Cruise Control Off The minimum set speed for the ACC system is 20­mph (32­km/h). When ACC is deactivated, the display will read “Adaptive Cruise Control Off.” When the system is turned on and in the ready state, the instrument cluster display will read “ACC Ready.” Push and release the Adaptive Cruise Control (ACC) on/off button.

The ACC menu in the instrument cluster displays “ACC Ready.” When ACC is activated, but the vehicle speed setting has not been selected, the display will read “Adaptive Cruise Control Ready.” Adaptive Cruise Control Ready When the system is off, the instrument cluster display will read “Adaptive Cruise Control (ACC) Off.” To turn the system off, push and release the Adaptive Cruise Control (ACC) on/off button again. At this time, the system will turn off and the instrument cluster display will show “Adaptive Cruise Control (ACC) Off.” Adaptive Cruise Control Set NOTE: You cannot engage ACC under the following condi­ tions:

When the SET (+) or the SET (-) button is pushed, the display will read “ACC SET.” When in 4WD Low WARNING!­ When ACC is set, the set speed will show in the instrument cluster display. When the brakes are applied Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have a collision. Always leave the system off when you are not using it. The ACC screen may display once again if any of the following ACC activity occurs:

When the parking brake is applied When the automatic transmission is in PARK, REVERSE or NEUTRAL System Cancel Driver Override When the vehicle speed is below the minimum speed range System Off When the brakes are overheated