RAM 1500 — To Turn Off

STARTING AND OPERATING 165 To Set A Desired ACC Speed NOTE: Fixed Speed Cruise Control cannot be set below 20­mph (32­km/h). If either system is set when the vehicle speed is above 20­mph (32­km/h), the set speed shall be the current speed of the vehicle. The gear selector is removed from the DRIVE position When the vehicle reaches the speed desired, push the SET (+) button or the SET (-) button and release. The instrument cluster display will show the set speed. The Electronic Stability Control/Traction Control System (ESC/TCS) activates The vehicle parking brake is applied NOTE: Fixed Speed Cruise Control can be used without ACC enabled.

To change between the different modes, push the ACC on/off button which turns the ACC and the Fixed Speed Cruise Control off. Pushing the Fixed Speed Cruise Control on/off button will result in turning on (changing to) Fixed Speed Cruise Control mode. NOTE: The Trailer Sway Control (TSC) activates Keeping your foot on the accelerator pedal can cause the vehicle to continue to accelerate beyond the set speed. If this occurs, the message “ACC DRIVER OVERRIDE” will display in the instrument cluster display. The driver switches ESC to Full Off mode The braking temperature exceeds normal range (overheated) The following conditions will only cancel the ACC system:

4 If you continue to accelerate beyond the set speed while ACC is enabled, the system will not be controlling the distance between your vehicle and the vehicle ahead. The vehicle speed will only be determined by the position of the accel­ erator pedal. To Cancel Driver seat belt is unbuckled at low speeds WARNING!­ Driver door is opened at low speeds To Turn Off In the Fixed Speed Cruise Control mode, the system will not react to vehicles ahead. In addition, the proximity warning does not activate and no alarm will sound even if you are too close to the vehicle ahead since neither the presence of the vehicle ahead nor the vehicle-to-vehicle distance is detected.

Be sure to maintain a safe distance between your vehicle and the vehicle ahead. Always be aware which mode is selected. The system will turn off and clear the set speed in memory if: The Adaptive Cruise Control (ACC) on/off button is pushed The following conditions cancel the ACC or Fixed Speed Cruise Control systems: The brake pedal is applied The Fixed Speed Cruise Control on/off button is pushed The CANC (cancel) button is pushed The Anti-Lock Brake system (ABS) activates The ignition is placed in the OFF position 4WD Low is engaged If ACC is set when the vehicle speed is below 20­mph (32­km/h), the set speed will default to 20­mph (32­km/h).

The trailer brake is applied manually (if equipped)