RAM 1500 — ParkSense Display

STARTING AND OPERATING 173 P ARK S ENSE S ENSORS P ARK S ENSE W ARNING D ISPLAY P ARK S ENSE D ISPLAY The four ParkSense sensors (six if equipped with Active Parksense), located in the front fascia/ bumper, monitor the area in front of the vehicle that is within the sensors’ field of view, and the four ParkSense sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors’ field of view. The front sensors can detect obstacles from approximately 12­inches (30 cm) up to 47­inches (120 cm) from the front fascia/bumper. The rear sensors can detect obstacles from approximately 12­inches (30 cm) up to 79­inches (200 cm).

These distances depend on the location, type and orientation of the obstacle in the horizontal direction. The ParkSense Warning screen is located within the instrument cluster display Ъ ­page­104. It provides visual warnings to indicate the distance between the rear fascia/bumper and/or front fascia/bumper and the detected obstacle. The warning display will turn on indicating the system status when the vehicle is in REVERSE or when the vehicle is in DRIVE and an obstacle has been detected. The system will indicate a detected obstacle by showing a single arc in the left, right, or center regions based on the obstacle’s distance and location relative to the vehicle.

If an obstacle is detected in the left, right, or center regions, the display will show a single arc in the left and/or right regions and the system will produce a tone. As the vehicle moves closer to the obstacle, the display will show the single arc moving closer to the vehicle and the tone will change from a single 1/2 second tone to slow, to fast, to continuous. 4