RAM 1500 — Enabling And Disabling The ParkSense Active Park Assist System

178 STARTING AND OPERATING CAUTION!­ into a parallel or a perpendicular parking space on either side (i.e., driver side or passenger side). E NABLING A ND D ISABLING T HE P ARK S ENSE A CTIVE P ARK A SSIST S YSTEM ParkSense is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity. NOTE: The driver is always responsible for controlling the vehicle, responsible for any surrounding objects, and must intervene as required.

The ParkSense Active Park Assist system can be enabled and disabled with the ParkSense Active Park Assist switch, located on the switch panel below the Uconnect display. The system is provided to assist the driver and not to substitute the driver. The vehicle must be driven slowly when using ParkSense in order to be able to stop in time when an obstacle is detected. It is recom­ mended that the driver looks over his/her shoulder when using ParkSense. During a semi-automatic maneuver, if the driver touches the steering wheel after being instructed to remove their hands from the steering wheel, the system will cancel, and the driver will be required to manually complete the parking maneuver.

NOTE: If your vehicle is equipped with a 12-inch Uconnect display, the ParkSense Active Park Assist switch is located above the display. To enable or disable the ParkSense Active Park Assist system, push the ParkSense Active Park Assist switch once (LED turns on). Pushing the switch a second time will disable the system (LED turns off). PARKSENSE ACTIVE PARK ASSIST SYSTEM — IF EQUIPPED The system may not work in all conditions (e.g. environmental conditions such as heavy rain, snow, etc., or if searching for a parking space that has surfaces that will absorb the ultrasonic sensor waves).

The ParkSense Active Park Assist system is intended to assist the driver during parallel and perpendicular parking maneuvers by identifying a proper parking space, providing audible/visual instructions through the instrument cluster display, and controlling the steering wheel. The ParkSense Active Park Assist system is defined as “semi-automatic” since the driver maintains control of the accelerator, gear selector and brakes. Depending on the driver's parking maneuver selection, the ParkSense Active Park Assist system is capable of maneuvering a vehicle The ParkSense Active Park Assist system will turn off automatically for any of the following conditions:

New vehicles from the dealership must have at least 30­miles (48­km) accumulated before the ParkSense Active Park Assist system is fully cali­ brated and performs accurately. This is due to the system’s dynamic vehicle calibration to improve the performance of the feature. Parking maneuver is completed. Vehicle speed is greater than 18­mph (30­km/h) when searching for a parking space. The driver must control the vehicle’s brakes. The automatic emergency braking feature is NOT intended to substitute for the driver during REVERSE maneuvers. Vehicle speed is greater than 5­mph (7­km/h) during active steering guidance into the parking space.