STARTING AND OPERATING 203 WARNING! An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. Integrated Trailer Brake Module (ITBM) — If Equipped GAWR Your vehicle may have an ITBM for electric and Electric Over Hydraulic (EOH) trailer brakes. Tongue weight rating for the trailer hitch utilized. Towing Requirements — Tires Trailer brakes are recommended for trailers over 1,000 lb (453 kg) and required for trailers in excess of 2,000 lb (907 kg). NOTE:
This module has been designed and verified with electric trailer brakes and new EOH systems. Some previous EOH systems may not be compatible with ITBM. Do not attempt to tow a trailer while using a compact spare tire. Do not drive more than 50mph (80km/h) when towing while using a full size spare tire. WARNING! 4 Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Do not connect trailer brakes to your vehicle's hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have an accident.
Check the trailer tires for proper tire inflation pressures before trailer usage. Towing any trailer will increase your stopping distance. When towing, you should allow for additional space between your vehicle and the vehicle in front of you. Failure to do so could result in an accident. Check for signs of tire wear or visible tire damage before towing a trailer. Replacing tires with a higher load carrying capacity will not increase the vehicle's GVWR and GAWR limits. Integrated Trailer Brake Module (ITBM) 1 — GAIN (-) Adjustment Button 2 — GAIN (+) Adjustment Button 3 — Manual Brake Control Lever For further information Ъ page409.
Towing Requirements — Trailer Brakes If the trailer weighs more than 1,000 lb (453 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. CAUTION! Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer.