RAM 1500 — Removal Of Jack And Tools

IN CASE OF EMERGENCY 347 R EMOVAL O F J ACK A ND T OOLS There are two ways to assemble the tools: To access the jack and tools, you must remove the plastic access cover located on the side of the front passenger’s seat. To remove the cover, pull the front part of the cover (closest to the front of the seat) toward you to release a locking tab. Once the front of the cover is loose, slide the cover toward the front of the seat until it is free from the seat frame. Assembled For Spare Tire Lowering/Raising Jack And Tools Release the tool bag straps from the jack and remove tools from bag.

1 — Lug Wrench 2 — Long Extension Without Spring Clip 2 3 — Long Extension With Spring Clip 3 4 — Long Extension With Spring Clip 4 5 — Short Extension 5 Assembled For Spare Tire Lowering/Raising 7 Pull Jack Access Cover From Front Remove the jack and tools by turning the wing bolt counterclockwise, remove the wing bolt and then slide the assembly out from under the seat. NOTE: If the tailgate is lowered, adding the shorter extension 5 to jack extension 4 will enable lowering the spare tire without having to raise the tailgate. Jack And Tool Bag