RAM 1500 — Removing The Spare Tire

348 IN CASE OF EMERGENCY CAUTION!­ 4 — Long Extension 4 5 — Short Extension 5 6 — Extension With Hook The lug wrench can only be attached to exten­ When attaching the tool to the winch mecha­ sion 2. nism be sure the large flared end opening on extension 4 is positioned correctly over the winch mechanism adjusting nut. After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid acceleration or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury.

WARNING!­ Damage to the lug wrench, extensions and winch mechanism may occur from improper tool assembly. Access Hole Cover Location 3. Insert the extension tube through the access hole between the lower tailgate and the top of the fascia/bumper and into the winch mechanism tube. Assembled For Jack Operation R EMOVING T HE S PARE T IRE 1. Remove the spare tire before attempting to jack up the truck. Attach the lug wrench to the extension tubes with the curved angle facing away from the vehicle. 2. Remove the protective cover over the access hole for the winch mechanism by sliding the cover upward.

Assembled For Jack Operation 1 — Lug Wrench 2 — Long Extension 2 3 — Long Extension 3 Winch Mechanism Tube