RAM 1500 — Jacking Instructions

IN CASE OF EMERGENCY 349 7. Pull the retainer through the center of the wheel. Inserting The Extension Tubes Into The Access Hole Rotating The Lug Wrench Handle 4. Rotate the lug wrench handle counter­ clockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle. 5. Pull the spare tire out from under the vehicle to gain access to the spare tire retainer. Disengaging The Retainer J ACKING I NSTRUCTIONS CAUTION!­ WARNING!­ The winch mechanism is designed for use with the jack wrench extension tool only. Use of air wrench or power tool may damage the winch.

Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: 7 Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. Pulling The Spare Tire Out Turn on the Hazard Warning Flashers. 6. Lift the spare tire with one hand to give clearance to tilt the retainer at the end of the cable. Apply the parking brake firmly and set the transmission in PARK. (Continued)