350 IN CASE OF EMERGENCY WARNING! Block the wheel diagonally opposite the wheel to be raised. Never start or run the engine with the vehicle on a jack. Do not let anyone sit in the vehicle when it is on a jack. Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. Jack Warning Label Assembled Jack And Tools CAUTION! 4. Placement for the front and rear jacking locations are critical. See below images for proper jacking locations. Only use the jack in the positions indicated and for lifting this vehicle during a tire change.
Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. If working on or near a roadway, be extremely careful of motor traffic. To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. 1. Remove the spare tire, jack, and tools from the stored location. 2. Using the lug wrench, loosen the wheel nuts (but do not remove), by turning them counter clockwise one turn while the wheel is still on the ground. 3. Assemble the jack and jacking tools. Connect the jack handle driver to the extension, then to the lug wrench. Jack / Extensions Placement