RAM 1500 — Reinstalling The Jack And Tools

IN CASE OF EMERGENCY 353 4. Rotate the lug wrench handle clockwise until the wheel is drawn into place against the underside of the vehicle. Continue to rotate until you feel the winch mechanism slip, or click three or four times. It cannot be overtightened. Push against the tire several times to ensure it is firmly in place. WARNING!­ 3. Secure the tool bag straps to the jack. A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately.

CAUTION!­ The winch mechanism is designed for use with the jack wrench extension tool only. Use of air wrench or power tool may damage the winch. R EINSTALLING T HE J ACK A ND T OOLS 1. Tighten the jack all the way down by turning the jack turn-screw counterclockwise until the jack is snug. Jack And Tools Tied 2. Position the jack and tool bag. Make sure the lug wrench is under the jack near the jack turn-screw. 4. Place the jack and tools in the storage position holding the jack by the jack turn-screw, slip the jack and tools under the seat so that the bottom slot engages into the fastener on the floor. NOTE: Ensure that the jack slides into the front hold down location.

7 Rotating The Lug Wrench Handle Jack And Tool Bag