RAM 1500 — Cabin Filter Replacement

SERVICING AND MAINTENANCE 383 5. Remove the filter cover by pushing in on the finger tabs on each end of the filter cover. 6. Remove the cabin air filter by pulling it straight out of the housing. 9. Pull the tension tether outward and reinstall the glove compartment past the travel stops by pushing in on the glove compartment sides. Filter Cover Cabin Air Filter 7. Install the cabin air filter with the arrow on the filter pointing toward the floor. When installing the filter cover, press on each end until you hear an audible click. Glove Compartment 1 — Glove Compartment Travel Stop 2 — Glove Compartment Tension Tether 3 — Glove Compartment Door NOTE:

Ensure the glove compartment door hinges and glove compartment travel stops are fully engaged. 10. Reattach the glove compartment tension tether by inserting the tether clip in the glove compartment and sliding the clip away from the face of the glove compartment door. 1 — Finger Tabs The cabin air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more often. CAUTION!­ 8 Filter Cover Removal 8. Reinstall the glove compartment on the hinges.