408 SERVICING AND MAINTENANCE 3. Disconnect the wiring harness connectors from the bulb socket. CENTER HIGH MOUNTED STOP LAMP (CHMSL) WITH CARGO LAMP See below steps to replace: 1. Remove the four screws holding the housing/ lens to the body as shown. CHMSL Bulb Location Wiring Harness Connector 3. Turn the desired bulb socket a quarter turn counterclockwise and remove the socket and bulb from housing. 4. Rotate the bulb socket counterclockwise a quarter turn to unlock it from the housing. 4. Pull the desired bulb straight from the socket. 5. Pull the bulb straight out of the socket. CHMSL Mounting Screw Locations CAUTION! CAUTION! 2.
Separate the connector holding the housing and wiring harness to the body. Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contract other oily surfaces. Shortened bulb life will result. Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result. 6. Reverse the procedure to install the bulb and housing. Outside Bulbs: Cargo Lamps Inside Bulb: Center High Mounted Stop Lamp 5. Reverse the procedure for installation of bulbs and housing.