GETTING TO KNOW YOUR VEHICLE 45 The power mirror controls consist of mirror select buttons and a four-way mirror control switch. To adjust a mirror, push the mirror select button for the mirror that you want to adjust. Using the mirror control switch, push on any of the four arrows for the direction that you want the mirror to move. (right). Push the switch once and the mirrors will fold in, push the switch a second time and the mirrors will return to the normal driving position. The mirrors come out of the unfolded position. The mirrors shake and vibrate at normal driving speeds.
If the mirror is manually folded after a powered cycle, a potential extra button push is required to get the mirrors back to the normal driving position. If the mirror does not fold automatically, check for ice or dirt buildup at the pivot area, which can cause excessive drag. To reset the power folding mirrors: Fold and unfold them by pushing the button (this may require multiple attempts). This resets them to their normal driving position. T RAILER T OWING M IRRORS I F E QUIPPED 2 These mirrors are designed with an adjustable mirror head to provide a greater vision range when towing extra-wide loads.
To change position inboard or outboard, the mirror head should be rotated (flipped in or out). Power Mirror Movement Power mirror preselected positions can be controlled by the optional Driver Memory Settings feature Ъ page31. P OWER F OLDING O UTSIDE M IRRORS F OR S TANDARD A ND T RAILER T OW I F E QUIPPED Power Folding Mirror Switch Resetting The Power Folding Outside Mirrors You may need to reset the power folding mirrors if the following occurs: The mirrors are accidentally blocked while folding. The power folding mirrors can be folded rearward and unfolded into the normal driving position.
The mirrors are accidentally manually folded/ unfolded (by hand or by pushing the power folding mirror switch). Trailer Towing Position The switch for the power folding mirrors is located between the power mirror switches L (left) and R