Bobcat 325/328 Excavator — 6902610-325-328 om 3-06(8).book

TRACK TENSION (CONT’D) Figure PM-46 Steel Track Clearance 2 1 Figure PM-44 Track Frame (19.6-32.3 mm) Track P-42741 B-15022 Add grease to the fitting (Item 1) [Figure PM-46] until the track tension is correct. Figure PM-47 Measure the track clearance at the middle track roller. Do not get fingers into pinch points between the track and the track roller. Use a bolt or dowel of the appropriate size to check the gap between the contact edge of the roller and the top edge of the track guide [Figure PM-44] .

Steel Track Clearance -19.6-32.3 1 Adjustment Figure PM-45 1 1 N-18490 Use tool MEL1560 (Item 1) [Figure PM-47] to loosen the bleed fitting (Item 2) [Figure PM-46] to release tension from the track. NOTE: Do not loosen the grease fitting (Item 1) [Figure PM-46]. Repeat the procedure for the other side. P-49116 Loosen the two bolts (Item 1) [Figure PM-45] from the cover. Pivot the cover downwards. 6804114 325/328 Excavator Operation and Maintenance Manual 82