Bobcat 325/328 Excavator — 6902610-325-328 om 3-06(8).book

ATTACHMENTS (CONT’D) Relieving Hydraulic Pressure Auxiliary Hydraulics Stop the engine and turn the key to ON (Standard) or press ENTER CODE Button (Keyless). Figure OI-93 Press AUX HYD Button (Item 1) [Figure OI-93] and then move the switch (Item 1) [Figure OI-94] to the right and left several times. 1 Return To Tank Valve (If Equipped) Figure OI-95 P16616 1 Press the Auxiliary Hydraulics button on the right console (Item 1) [Figure OI-93] . Figure OI-94 1 P-49178 The return to tank valve is located under the right side cover. Remove the spool lock (Item 1) [Figure OI-95] and push the spool in to direct auxiliary return hydraulic fluid to the reservoir.

2 Pull the spool out, and install the spool lock (Item 1) [Figure OI-95] for two-way hydraulic auxiliary flow operation. P-42157 Move the switch (Item 1) [Figure OI-94] on the right control lever to the right or left to direct fluid flow to an attachment such as a breaker or hydraulic clamp. Press the switch (Item 2) [Figure OI-94] on the front of the handle to provide constant flow to the female connector. NOTE: Press the switch (Item 1) [Figure OI-94] to the left while pressing the switch on the front of the handle to provide constant flow to the male connector. Press the switch (Item 2) [Figure OI-94] a second time to stop auxiliary flow to the quick connectors.

325/328 Excavator Operation and Maintenance Manual 42