OPERATING PROCEDURE (CONT’D) Figure OI-102 Excavating (Cont’d) Figure OI-101 Do not dig under the excavator [Figure OI-102] . Do not use the bucket as a breaker or pile driver. It is better to excavate hard or rocky ground after breaking it with other equipment. This will reduce damage to the excavator. Extend the arm and uncurl the bucket to dump the material into a pile or truck [Figure OI-101] . Do not move the excavator while the bucket is in the ground. IMPORTANT Dig only by moving the boom and arm towards the Excavator. Avoid operating hydraulics over relief pressure. Failure to do so will overheat hydraulic components.
Do not back dig (digging by moving the boom and arm away from the excavator). Damage to the X-Change and attachments may occur. I-2220-0503 325/328 Excavator 45 Operation and Maintenance Manual WRONG MS1857 B-19943